Mitutoyo SURFTEST SJ-410 - Saving the Condition File

9.2.2 Saving the condition file
A set of condition files can be saved in the internal memory.
■ Operating procedure (Refer to
9.1 "■ Accessing the Condition File Menu screen".)
Home screen to Main Menu ⇒ ⇒
Condition File Menu screen
1 Touch .
Condition File Save screen
2 Touch the file number to be saved.
Touch the file number with the file name displayed as "*******". If
you touch the file number with the file name displayed, the file will
be overwritten.
File Name Entry screen
3 Enter a name for the condition file, and touch .
To overwrite the file, touch
.
To cancel saving, touch
.
TIP
• For information about character entry, refer to "2.2.4
Entering numeric values/characters" (page 2-5).
NOTE
• A file name can have at most 8 characters. Refer to "
2.2.4 Entering numeric values/characters" (page 2-5).
• The file name or folder name cannot include lowercase
alphabets.
Condition File Save screen
¾ The condition file is saved to the internal memory.
No. 99MBB765A
9-4