Mitutoyo SURFTEST SJ-410 - X-Axis Adjustment Unit

19. INSTALLING THE SJ-410 WITH OPTIONAL ACCESSORIES
2 Attach the tilt adjustment unit to the simple column stand using the 3 mounting
screws.
Simple column stand
Tilt adjustment unit
Mounting screws (M4 x 8)
3 Attach the drive/detector unit to the tilt adjustment unit using the 2 drive/detector unit
securing screws.
Tilt adjustment unit
Drive/detector unit securing screw
(M4 x 8)
Drive/detector unit
19.2.3 X-axis adjustment unit
Using the X-axis adjustment unit, adjustment in the X-axis direction can be easily
performed by operating the micrometer head. It is useful for adjusting the measurement
starting position when the measurement range is limited or for measurement with the short
approach length.
■ Application example
Manual handle
X-axis adjustment unit
Drive/detector unit
X direction
No. 99MBB765A
19-7