4.5.2 Start measurement
NOTE
• Measurement cannot be started when the battery icon is displayed. Connect
the AC adapter, or charge the battery. Refer to "3.9 Power Supply" (page 3-24) for
details.
■ Operation procedure
Home screen
1 Press
on the Home screen.
Measurement Waveform Display screen
¾ The detector starts traversing to perform measurement.
While measurement is being performed (detector is
traversing), the measurement waveform display screen is
displayed.
NOTE
• Press during measurement to stop for
unavoidable reasons.
Home screen
¾ After the measurement has been completed, the measured
value will be displayed.
TIP
• For information about the measurement results, refer to
"
4.6 Switch the Display of Measurement Results" (page
4-17).
No. 99MBB765A
4-14
To Next Page
Loading...
