Mitutoyo SURFTEST SJ-410 - Modifying the Evaluation Profile and Cut-Off Length; Modifying the Evaluation Profile

7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
7.3.2 Modifying the evaluation profile and cut-off length
You can modify the evaluation profile and cut-off length to match the target surface.
TIP
• For definitions of the evaluation profile and filter, refer to "23.2 Evaluation Profiles and
Filters" (page 23-6).
■ Standards and evaluation profiles
Profiles selectable according to the standard are displayed.
Evaluation profiles
Roughness
standard
P R W DF R-Motif W-Motif
JIS1982 ○ ○ － － － －
JIS1994 － ○ － － － －
JIS2001 ○ ○ ○ ○ ○ ○
ISO1997 ○ ○ ○ ○ ○ ○
ANSI － ○ ○ － － －
VDA ○ ○ ○ ○ － －
Free ○ ○ ○ ○ ○ ○
7.3.2.1 Modifying the evaluation profile
You can modify the evaluation profile to match the target surface.
TIP
• For definitions of the evaluation profile and filter, refer to "18.2 Evaluation Profiles and
Filters" (page 23-6).
■ Operating procedure (Refer to
7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒
Evaluating Condition Menu screen
1 Touch on the Evaluating Condition Menu screen.
No. 99MBB765A
7-7