Mitutoyo SURFTEST SJ-410 - Loading Measurement Results from the SD Card; Loading the Saved Measurement Results

10. MEASUREMENT RESULTS
10.3 Loading Measurement Results from the SD Card
The saved measurement results on the SD card can be loaded.
When the Save10-saved data are loaded, the existing SJ-410 internal memory is
overwritten with the loaded Save10-saved data, and the calculation results are displayed.
The following operations can be performed for the loaded results just as for the results
obtained through the measurement: recalculating the measurement results by modifying
the measurement conditions, printing data on the printer, resaving back to the SD card.
IMPORTANT
• By loading the measurement results, the condition settings of the SJ-410 are modified
to that when the measurement results are saved.
10.3.1 Loading the saved measurement results
■ Operating procedure (Refer to 10.1 "■ Accessing the Measurement Results Menu screen".)
Home screen to Main Menu ⇒
Measurement Result screen
1 Touch .
Measurement Result Load screen
2 Touch the folder containing the measurement results to be loaded.
If the folder containing the measurement results to be loaded is
not displayed, touch
/ to display the folder.
Measurement Result Load screen
3 Touch the measurement results to be loaded.
If the measurement results to be loaded are not displayed, touch
/ / / to display the measurement results.
No. 99MBB765A
10-5