Mitutoyo SURFTEST SJ-410 - Setting the Save10 Function

No. 99MBB765A
13-36
13.12.7 Setting the Save10 function
The instrument can be set to automatically save the latest 10 measurements to the SD
card.
This function is called “Save10”. Note that when more than 10 total items are saved, the
older data is then deleted.
■ Operating procedure (Refer to 13.1, “■ Accessing the Operating Environment Setup screen”.)
Home screen to Main Menu ⇒
Operating Environment Setup screen
1
Touch .
SD Card Setup screen
2
Set the Save10 function to ON or OFF.
Touching
cycles through the available
settings, ON and OFF.
"ON": Sets the Save10 function to ON.
"OFF": Sets the Save10 function to OFF.