Mitutoyo SURFTEST SJ-410 - Saving the Condition File; Saving the Condition File Newly

9. CONDITION FILE
Condition File Load screen
¾ The relevant condition files are found by searching with the
entered character.
To cancel the searching, touch
[Close].
If the condition file to be loaded is not displayed, touch
/ / / to display the condition file.
9.3.2 Saving the condition file
A set of condition files can be saved on the SD card (optional).
9.3.2.1 Saving the condition file newly
■ Operating procedure (Refer to 9.1 "■ Accessing the Condition File Menu screen".)
Home screen to Main Menu ⇒ ⇒
Condition File Menu screen
1 Touch .
Condition File Save screen
2 Touch .
No. 99MBB765A
9-9