Mitutoyo SURFTEST SJ-410 - Setting the Printer Paper

3. SETTING UP THE SJ-410
No. 99MBB765A
3-19
3.7 Setting the Printer Paper
The SJ-410 has a built-in printer that can print the measurement results and other data. To
use this printer, you must set the printer paper to the SJ-410.
■ Setting the printer paper
● Removing the printer cover
To set the printer paper, remove the printer cover from the display unit in advance.
1 Turn the display unit off.
2 Press the button at the side of the printer cover.
The front of the printer cover is lifted.
Printer cover removal button
3 Remove the printer cover while opening it.
Removing the printer cover
Button
Printer cover