● Setting the printer paper
1 If unnecessary printer paper is left in the display unit of the SJ-410, remove it.
2 With the printer paper pulled out, set the printer paper to the display unit.
• If the printer paper is not set in the correct direction, data will not be printed properly. Be
sure to set the printer paper in the direction shown in the following figure.
Setting the printer paper
● Attaching the printer cover
1 Hook the top of the printer cover on the main unit, and close the cover.
Attaching the printer cover
2 Push the front of the printer cover until it clicks.
Setting the printer cover
Printer paper ( High quality
paper 5 rolls)
To Next Page
Loading...
