12. STATISTICAL MEASUREMENT
12.10 Renaming Statistical Data
The saved statistical data on the SD card can be renamed.
IMPORTANT
• When using the built-in battery, make sure it is sufficiently charged. When the file
names of the statistical data are modified while the level of the battery remainder power
is low, the power of the SJ-410 may be turned off while modifying the file names.
• Do not insert or remove the SD card while the SJ-410 is gaining access.
■ Operating procedure (Saving the data newly) (Refer to
12.2 "■ Accessing the Statistical Menu screen".)
Home screen to Main Menu ⇒ ⇒
Statistical Menu screen
1 Touch .
Statistical Data screen
2 Touch .
3 Touch the statistical data to be renamed.
If the item to be renamed is not displayed, touch
/ / / to display the condition file.
Statistical Data Rename screen
TIP
• It is possible to search for the statistical data to be
renamed. For information about the searching
procedure, refer to "
12.7.2 Searching the file to be
loaded
" (page 12-14).
No. 99MBB765A
12-21
To Next Page
Loading...
