22.12 Contact Connector Specifications
The following figure shows the connection between the SJ-410 and a foot switch.
Foot switch connection
22.13 Connection Specifications with a Personal
Computer
To connect the SJ-410 with a personal computer for communication, set the display unit to
the Home screen. Communication may not be established if the display unit is set to the
other screen.
■ Communication Conditions
● Pin assignment of the connector between the SJ-410 and a personal computer
SJ-410 Personal computer side
RS-232C connector D-SUB connector, 9-pin
1 DCD 1
TXD 2 RXD 2
RXD 3 TXD 3
4 DTR 4
GND 5 GND 5
6 DSR 6
CTS 7 RTS 7
RTS 8 CTS 8
9 RI 9
10
11
12