Mitutoyo SURFTEST SJ-410 - Turning on the Power Supply

3. SETTING UP THE SJ-410
No. 99MBB765A
3-27
3.9.2 Turning on the power supply
■ Power supply from a built-in battery (when using a built-in battery)
1 Set the battery switch to ON.
Built-in battery on/off switch
2 Press the [POWER] key to turn the power on.
[POWER] key
IMPORTANT
• When the remaining battery power falls between 40% and 20%, connect the AC adapter
as soon as possible.
• Connect the AC adapter immediately when the remaining battery power approaches
0%. When SJ-410 is left with no battery charge, measurement results might be erased.
100 - 80%
80 - 60%
60 - 40%
40 - 20%
20 - 0%
Charging in
progress
TIP
• For more information about the charging procedure, refer to "3.9.1 Recharging the
built-in battery" (page 3-25).
Built-in battery on/off switch
OFF
ON
[POWER] key
Indication of remaining
voltage
Indication condition
of charge
The power turns off.
The display when the built-in
battery switch is OFF
The display when the
built-in battery is in
abnormal state