1. SJ-410 OVERVIEW
1.2 Standard SJ-410 Configuration
This section explains the standard configuration, the standard set, and typical uses of the
optional accessories.
■ Standard SJ-410 configuration
Check that the SJ-410 package you purchased contains all the products shown in the
following figure.
Height/tilt adjustment
unit
Display unit
Drive unit
With a skid
nosepiece
Skidless
nosepiece
Detector main
unit
Standard stylus
Measurement Type
(Measuring Force)
SJ-411
(4 mN)
SJ-411
(0.75 mN)
SJ-412
(4 mN)
SJ-412
(0.75 mN)
Code No. (Set) 178-580-12 178-580-11 178-582-12 178-582-11
Height/tilt adjustment unit 12AAW646
Drive 25 mm (984.251 in) drive unit 50 mm (1.968 in) drive unit
Detector 178-397 178-396 178-397 178-396
Standard stylus 12AAB403 12AAC731 12AAB403 12AAC731
Skidless nosepiece 12AAB355
Nosepiece with a skid 12AAB344
No. 99MBB765A
1-5
To Next Page
Loading...
