17. USEFUL FEATURES OF THE SJ-410
No. 99MBB765A
17.11 Function Restriction
To prevent the settings (such as condition settings) from being modified, operations for
each setup item on the Main Menu can be disabled. To disable these operations, set the
password.
The setup items which the operation functions can be restricted are as follows.
• Calibration measurement
• Statistical measurement
• Condition settings
• Parameter
• Condition file
• Measurement result
• Calculation results list
• Screen change
• Operating environment setup
• Preliminary measurement
TIP
•
For information about setting the function restriction, refer to "13.11 Restricting
Operation Functions" (page 13-25).
17.12 External Input Device
It is possible to start measurement using the foot switch. Foot switch is an optional
accessory. Please purchase it if necessary.
Rear of the display unit
TIP
• For information about the external input connector specifications, refer to "22.11 Contact
Connector Specifications" (page 22-22).
To Next Page
Loading...
