Mitutoyo SURFTEST SJ-410 - Shortening the Approach Length for Measurement

No. 99MBB765A
5-6
5.3 Shortening the Approach Length for Measurement
When the detector is moved to the origin, measurement can be performed with the
approach length of 0.15 mm (0.005 in). When measurement with the approach length of
0.15 mm (0.005 in) can be performed,
is indicated on the top of the screen.
Home screen
IMPORTANT
• To perform measurement with the approach length of 0.15 mm (0.005 in), you must
move the detector to the origin each time before starting measurement.
For normal measurement
For short approach length measurement
Approach travel
0.5 mm
(0.019 in)
Evaluation length
ℓ×n
Origin
Traverse
Pre-travel
Post-travel
Normal measuring
position
Approach travel
0.15 mm
(0.005 in)
Evaluation length
ℓ×n
Origin
Traverse length
Normal measuring
position
Pre-travel
Post-travel
Traverse length