1. SJ-410 OVERVIEW
1.3 Name of Each Part on the SJ-410
This section gives the name of each key on the display unit.
■ Display unit and drive/detector unit
The SJ-410 consists of the display unit and drive/detector unit. The drive/detector unit is
designed to be used in both ways: attached to or detached from the display unit.
Depending on the shape of the workpiece, it may be easier to perform measurement with
(or without) mounting the drive/detector unit to the display unit. Use the SJ-410 in more
suitable way.
Display unit
Drive/detector unit
Drive unit
Detector
Display unit and drive/detector unit
TIP
• For information about attaching and detaching the drive/detector unit, refer to "3.3
Attaching and Detaching the Drive Unit and Detector (page 3-6)".
No. 99MBB765A
1-7
To Next Page
Loading...
