Mitutoyo SURFTEST SJ-410 - Attaching the Touch Panel Protection Sheet

3. SETTING UP THE SJ-410
No. 99MBB765A
3-17
3.5 Attaching the Touch Panel Protection Sheet
■ Attaching the touch panel protection sheet
NOTE
• When attaching the touch panel protection sheet, first of all, wipe the touch panel clean
using a dry cloth.
1 Peel the separator (sheet protecting the self-adhesive surface) from the touch panel
protection sheet.
2 Put the protection sheet in place and press the entire surface lightly using a dry
cloth.
Attaching the touch panel protection sheet
■ Replacing the touch panel protection sheet
Check the condition of the protection sheet daily after completing a measurement task.
Replace the protection sheet if it is heavily soiled or if the display cannot be viewed easily.
A replacement touch panel protection sheet can be purchased from your SJ-410 dealer.
- Touch panel protection sheet
Part No.
Qty
12BAL402
1
12AAN040
10
Touch panel protection sheet