7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
7.3.10 Setting the mean line processing
Sets the mean line processing.
■ Operating procedure (Refer to
7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒
⇒
⇒
Measurement Conditions Menu screen
1 Touch on the Measurement Condition Menu
screen.
Mean Line Processing Setup screen
2 Touch [OFF] or [Entire], then touch .
NOTE
• The selection items for the mean line processing is
limited depending on setting of the standard, profile,
number of sampling length, and desired length.
Measurement Conditions Menu screen
¾ The set mean line processing is displayed on the Evaluating
Condition Menu screen.
No. 99MBB765A
7-47
To Next Page
Loading...
