Desired Tilt Setup screen
12 Touch [Range set].
¾ The part between rulers 3 and 4 of the evaluation profile turns
orange.
NOTE
• The specified range of the first half (defined by P1 and
P2) and that of the latter half (defined by P3 and P4)
must meet the following relationship:
P1 <P2 ≦ P3 < P4
• When the two ends are set, [Fast tilt] and [Last tilt]
cannot be selected.
13 Touch
Desired Tilt Setup screen
.
Evaluating Condition Menu screen
¾ The set desired profile compensation is displayed on the
Evaluating Condition Menu screen.
No. 99MBB765A
7-46
To Next Page
Loading...
