7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
Desired Tilt Setup screen
¾ The rulers are displayed on the Desired Tilt Setup screen.
The light blue line is ruler 3 and the orange line is ruler 4.
Ruler 3 is selected the first time you set up.
(light blue) is
displayed on the selected ruler.
Desired Tilt Setup screen
9 Touch a place to set the ruler 3.
To adjust the ruler position, touch
/ .
Desired Tilt Setup screen
10 Touch [Switch Ruler].
¾ The ruler 4 is selected and
(orange) is displayed above.
TIP
• Touching [Ruler Switch] cycles through rulers.
Desired Tilt Setup screen
11 Touch a place to set the ruler 4.
To adjust the ruler position, touch
/ .
No. 99MBB765A
7-45
To Next Page
Loading...
