Mitutoyo SURFTEST SJ-410 - Dimensions of Stylus and Nosepiece

22. PRODUCT SPECIFICATIONS
No. 99MBB765A
22-13
22.9.3 Dimensions of stylus and nosepiece
Stylus name
Part No.
Tip radius
Tip
Angle B
Standard stylus
12AAE882
1 μm
(39.370 μin)
60°
12AAE924
1 μm
(39.370 μin)
90°
12AAC731
2 μm
(78.740 μin)
60°
12AAE883
250 μm
(9842.519 μin)
60°
12AAB403
5 μm
(196.850 μin)
90°
12AAB415
10 μm
(393.700 μin)
Small hole stylus
12AAC732
2 μm
(78.740 μin)
60°
12AAB404
5 μm
(196.850 μin)
90°
12AAB416
10 μm
(393.700 μin)
Ultra-small hole stylus
12AAC733
2 μm
(78.740 μin)
60°
12AAB405
5 μm
(196.850 μin)
90°
12AAB417
10 μm
(393.700 μin)
Ultra-small stylus
12AAC734
2 μm
(78.740 μin)
60°
12AAB406
5 μm
(196.850 μin)
90°
12AAB418
10 μm
(393.700 μin)
Deep groove (30 mm/1.181 in) stylus
*12AAC737
2 μm
(78.740 μin)
60°
*12AAB407
5 μm
(196.850 μin)
90°
*12AAB419
10 μm
(393.700 μin)
If a stylus with * mark is used, the detector's measuring force will not be covered under warranty.
Detailed
drawing of A
(Identification
color)
Color
Detailed
drawing of A
(Identification color)
Color
No. 12AAC732 is black.
No. 12AAC733 is black.
Detailed
drawing of A
Color
(Identification color)
No. 12AAC734 is black.
Detailed
drawing of A
Color
(Identification color)
Detailed
drawing of A
Color
(Identification
color)