Mitutoyo SURFTEST SJ-410 - Page 520

No. 99MBB765A
22-14
Stylus name
Part No.
Tip radius
Tip
Angle B
Deep groove (20 mm/0.787 in) stylus
*12AAC736
2 μm
(78.740 μin)
60°
*12AAB408
5 μm
(196.850 μin)
90°
*12AAB420
10 μm
(393.700 μin)
Deep groove (10 mm/0.393 in) stylus
12AAC735
2 μm
(78.740 μin)
60°
12AAB409
5 μm
(196.850 μin)
90°
12AAB421
10 μm
(393.700 μin)
Rolling circle waviness stylus
12AAB338
0.8 mm
(0.031 in)
-
Gear tooth surface stylus
12AAB339
2 μm
(78.740 μin)
60°
12AAB410
5 μm
(196.850 μin)
12AAB422
10 μm
(393.700 μin)
Knife edge surface stylus
12AAC738
2 μm
(78.740 μin)
60°
12AAB411
5 μm
(196.850 μin)
90°
12AAB423
10 μm
(393.700 μin)
If a stylus with * mark is used, the detector's measuring force will not be covered under warranty.
Detailed
drawing of A
Color
(Identification
color)
Detailed
drawing of A
Color
(Identification
color)
Ball φ1.588
(0.062 in)
Detailed
drawing of A
Color
(Identification
color)
Detailed
drawing of A
Color
(Identification
color)
A