Mitutoyo SURFTEST SJ-410 - Home Screen

No. 99MBB765A
2-8
2.3 Home Screen
When the power to the SJ-410 is turned on, the Home screen appears on the display of
the display unit.
This section explains the items displayed on the Home screen.
■ Display on the Home screen
Home screen
■ Measurable level meter
When the detector is attached to the drive/detector unit, you can check the stylus position
with the level meter. If the detector is not in the measurable position, it is displayed in red.
Home screen
Parameter
Roughness
standard
Cutoff
related items
Traversal
speed
Number of
sampling lengths
Measurable level meter
Measurement range
button
Display (A/B)
switch button
Operation icons
Condition setting button
Refer to "4.4 Modify the
Condition Settings"
(page 4-10).
Evaluation profile display button
Refer to "4.6.2 Display the evaluation
profiles" (page 4-18).
Graph display button
Refer to "4.6.3 Display the graph" (page 4-19).
Operation Unit Operation buttons
Refer to "Chapter 5 OPERATION
METHOD FOR THE DRIVE UNI
T/DETECTOR /AUTOMATIC POSI
TIONINGUNIT (OPTIONAL ACCE
SSORIES)" (page 5-1).
Guidance button
Refer to "17.1 Guidance
Screen"
(page 17-1).
Parameter switch button
Refer to "4.6.1 Switch the parameter to be displayed" (page 4-18).