Mitutoyo SURFTEST SJ-410 - Page 41

2. OUTLINE OF THE SJ-410, FUNCTIONS AND KEY OPERATIONS
No. 99MBB765A
2-9
■ Displaying the remaining battery power
The icon for displaying the remaining battery power appears on the display of the display
unit. While the battery is being charged, an icon indicating that charging is taking place is
displayed.
During the AC adapter powered operation, the battery is automatically charged according
to the power consumption.
100 - 80% 80 - 60% 60 - 40% 40 - 20% 20 - 0%
Charging in
progress
IMPORTANT
• Observe the following when the SJ-410 is not powered with the AC adapter.
・When the remaining battery power falls between 20% and 40%, connect the AC
adapter as soon as possible.
・ Connect the AC adapter immediately when the remaining battery power
approaches 0%. When SJ-410 is left with no battery charge, measurement
results might be erased.
TIP
• For more information about the charging procedure, refer to "3.9.1 Recharging the
built-in battery" (page 3-25).
The icon for displaying
the remaining battery
power
Indication of
remaining voltage
Indication condition
of charge
The power turns off.
The display when the
built-in battery switch is OFF
The display when the
built-in battery
is in abnormal state