Mitutoyo SURFTEST SJ-410 - Print Setup; Setting the Print Items

No. 99MBB765A
13-10
13.5 Print Setup
13.5.1 Setting the print items
When printing output from the SJ-410, print conditions must be set.
For the SJ-410, items such as logo and date are referred to as print items. Print items that
can be individually set for printing are indicated in the “Description” column in the following
table.
Print item
Initial
Settings
Description
Auto-print OFF
Prints the measurement results automatically when a measurement
is completed.
Logo ON Print item. Sets whether or not to print the logo.
Date ON Print item. Sets whether or not to print the date.
Comment OFF
Print item. Sets whether or not to print the comment. When the
comment printing is specified, the Comment Entry screen appears
before printing.
A comment can have at most 20 alphanumeric characters.
Measurement conditions OFF Print item. Sets whether or not to print the measurement conditions.
Print profile 1 Sets the number of profiles to print.
Evaluating conditions ON Print item. Sets whether or not to print the evaluating conditions.
Calculation results ON Print item. Sets whether or not to print the calculation results.
N (sampling lengths) result OFF Print item. Sets whether or not to print the sampling lengths result.
Tolerance limit value OFF Print item. Sets whether or not to print the tolerance values.
Evaluation profiles ON Print item. Sets whether or not to print the evaluation profiles.
Display profile OFF Print item. Sets whether or not to print the display profiles.
BAC OFF Print item. Sets whether or not to print the BAC Graph.
ADC OFF Print item. Sets whether or not to print the ADC Graph.
Economy print OFF
Sets whether or not to omit titles (or other parts) from printing to
save on papers.
Horizontal magnification AUTO Sets the horizontal magnification for printing.
Vertical magnification AUTO Sets the vertical magnification for printing.
Print form
Vertical
print
Sets vertical or horizontal.