Mitutoyo SURFTEST SJ-410 - Calibrating the Touch Panel

13. OPERATING ENVIRONMENT SETUP
No. 99MBB765A
13-47
13.17 Calibrating the Touch Panel
Touch panel calibration allows for aligning touch points.
NOTE
• For touch panel calibration, use the stylus pen supplied with the SJ-410.
• Touch panel does not need to be calibrated frequently.
Calibration is necessary when the SJ-410 is used for the first time or when the touch
points are not in the correct positions.
■ Operating procedure (Refer to 13.1, “■ Accessing the Operating Environment Setup screen”.)
Home screen to Main Menu ⇒ ⇒
Operating Environment Setup screen
1
Touch .
Touch Panel Calibration screen
2
Touch the center of “+” displayed on the screen.
 When the calibration is complete, the Operating Environment
Setup screen appears.