Mitutoyo SURFTEST SJ-410 - Renaming the Condition File

9. CONDITION FILE
9.3.4 Renaming the condition file
The saved condition file on the SD card can be renamed.
■ Operating procedure (Refer to
9.1 "■ Accessing the Condition File Menu screen".)
Home screen to Main Menu ⇒ ⇒
Condition File Menu screen
1 Touch .
2 Touch the condition file to be renamed.
If the condition file to be renamed is not displayed, touch
/ / / to display the condition file.
Condition File Rename screen
TIP
• It is possible to search for the condition file to be
renamed. For information about the searching
procedure, refer to "
9.3.1.2 Searching the file to be
loaded
" (page 9-8).
File Name Entry screen
3 Enter a name for the condition file, and touch .
To cancel renaming the condition file, touch
.
TIP
• For information about character entry, refer to "2.2.4
Entering numeric values/characters" (page 2-5).
NOTE
• A file name can have at most 8 characters. Refer to "
2.2.4 Entering numeric values/characters" (page 2-5).
• The file name or folder name cannot include lowercase
alphabets.
Condition File Save screen
¾ The entered condition file name is displayed.
No. 99MBB765A
9-13