Mitutoyo SURFTEST SJ-410 - Setting the W-Motif Calculation Condition

8. MODIFYING PARAMETERS
No. 99MBB765A
8-19
8.3.6.2 Setting the W-Motif calculation condition
When “Motif” is selected as the profile motif for the SJ-410, calculation can be set to
continue even when the results for settings for the upper limit values A and B are not
fulfilled.
■ Operating procedure (Refer to 8.1 "■ Accessing the Parameter Setup screen".)
Home screen to Main Menu ⇒ ⇒
Details Setting screen
2
Touch .
Touching
cycles through the available settings,
ON and OFF.
Motif "ON" : AnnexA "ON": Continues calculation
Motif "OFF": Stops calculation
Details Setting screen