Mitutoyo SURFTEST SJ-410 - Overwriting the Measurement Results

10.4.2 Overwriting the measurement results
■ Operating procedure (Refer to 10.1 "■ Accessing the Measurement Results Menu screen".)
Home screen to Main Menu ⇒
Measurement Result screen
1 Touch .
Measurement Result Save screen
2 Touch the folder to save the measurement results.
3 Touch the measurement results to be overwritten.
If the measurement results to be overwritten are not displayed,
touch
/ / / to display the measurement results.
Measurement Result Save screen
TIP
• It is possible to search for the measurement results to
be overwritten. For information about the searching
procedure, refer to "10.3.2 Searching for files to load"
(page
10-6).
Measurement Result Save screen
4 Touch .
To cancel overwriting, touch
.
TIP
• On the message screen, following information is
displayed.
•
Display the target file name.
• Display a comment if it is entered in the file.
• For information about entering a comment, refer to
"9.3.2.1 Saving the condition file newly" (page 9-9).
No. 99MBB765A
10-10