Mitutoyo SURFTEST SJ-410 - Checking the Results at each Sampling Length

No. 99MBB765A
11-2
11.1 Checking the Results at Each Sampling Length
It is possible to check the measurement results at each specified sampling length and the
GO/NG Judgment results for each parameter.
■ Operation procedure
Home screen
1 Press on the Home screen to display the Main Menu
screen.
Main Menu screen
2
Touch .
Sampling Lengths Result screen
3
Touch the desired parameter button to check the results at each
sampling length.
TIP
• To check the B evaluating conditions, touch .
• If the parameter to be checked is not displayed, touch
/ to display the parameter.
Measurement Result at Each Sampling
Length screen
4
Check the measurement results at each sampling length and the
GO/NG Judgment results.
If the measurement results are over the upper limit, at each
sampling length, the sampling length part is displayed in red. If the
measurement results are below the lower limit, the sampling
length part is displayed in blue.
TIP
• F
or information about setting the upper and lower
tolerance limits, refer to "8.3.7 Setting the GO/NG
judgment function" (page 8-20).