No. 99MBB765A
13.12.1 SD card folder construction
When SJ-410 data is saved on the SD card, the data is saved in the following folders.
■ SD Card Folder Construction
The folder construction in the SD card is explained below.
SJ-410 BKUP Used for backup of the data to be saved in the internal memory.
COND Used to save/load the measurement conditions.
Maximum number of files to be saved: 500 files
DATA Used to save the measurement results.
The DATA folder consists of 20 folders. The results of 500 measurements can
be saved in each of 20 folders. The resulting data can only be loaded by the
SJ-410.
Maximum number of files to be saved: 10,000 files
FOL-1 to 20
IMG Used to save the displayed contents on screens in the BMP file format when
the hardcopy function is enabled,
Maximum number of files to be saved: 500 files
STAT Used to save the statistical measurement results.
Maximum number of files to be saved: 500 files
TRACE10 Used for the Save10 data.
USER Used to save the measurement results and calculation results in a text file.
The USER folder consists of 20 folders. The results in 500 text files can be
saved in each of 20 folders. The data saved in a text file can be registered
using text editor on PCs, and therefore, are easy to access for users.
Maximum number of files to be saved: 10,000 files
FOL-1 to 20
NOTE
• The data files in the memory card that can be registered (and deleted) on PCs using
card readers are limited to graphic data in the “IMG” folder and text files in “USER”
folder. Do not modify/delete the files in the other folders. Do not modify/delete the
folders. It causes a card access error, and “Unformatted” appears.
• When the text files in the “USER” folder are modified on a PC, the data cannot be
loaded properly using communication software.
To Next Page
Loading...
