10. MEASUREMENT RESULTS
10.6 Renaming the Measurement Results on the SD
Card
The file name of the measurement results saved on the SD card can be renamed.
NOTE
• The file name cannot include lowercase alphabets, [*], [¥], [.], and space.
■ Operating procedure (Refer to
10.1 "■ Accessing the Measurement Results Menu screen".)
Home screen to Main Menu ⇒
Measurement Result screen
1 Touch .
Measurement Results Rename screen
2 Touch the folder containing the measurement results to be
renamed.
If the folder to save the measurement results is not displayed,
touch
/ to display the folder.
3 Touch the measurement results to be renamed.
If the measurement results to be renamed are not displayed,
touch
/ / / to display the measurement results.
Measurement Results Rename screen
TIP
• It is possible to search for the measurement results
which file names are to be modified. For information
about the searching procedure, refer to "10.3.2
Searching for files to load" (page 10-6).
No. 99MBB765A
10-15
To Next Page
Loading...
