Mitutoyo SURFTEST SJ-410 - Confirming the Calibration History

No. 99MBB765A
6-18
6.5 Confirming the Calibration History
SJ-410 can store up to 100 cases of date and time information as calibration history.
Confirm the calibration history following the procedures below.
NOTE
• Be aware that the calibration history is completely cleared when [Clear all history]
is pressed.
Also, be aware that the calibration history is completely cleared, when power supply
from the built-in battery is cut or "RestToDefault" in the "Set Environ" is performed.
■ Operating procedure (Refer to 6.2 "■ Accessing the Calibration Menu screen".)
Home screen to Main Menu ⇒ ⇒
Calibration Menu screen
1
Touch on the Calibration Menu screen.
Calibration History screen
2
Confirm the data of time of the calibration.
TIP • To cancel the calibration history, touch [Clear all
history], then
.