Mitutoyo SURFTEST SJ-410 - Measurement with the Short Approach Length; Automatic Positioning Unit (Optional); Indicating Contact State of the Detector

No. 99MBB765A
17-2
17.2 Measurement with the Short Approach Length
For information about measurement with the short approach length, refer to "5.3
Shortening the Approach Length for Measurement" (page 5-6).
17.3 Automatic Positioning Unit (Optional)
For information about measurement using the automatic positioning unit, refer to "5.5
Operation Method for the Automatic Positioning Unit (Optional Accessory)" (page 5-1).
17.4 Indicating Contact State of the Detector
Whether the position of the detector is on the measurable range can be checked on this
screen.
Indicating contact state of the detector
• When the level meter displayed on the left of the screen is red, the detector tip is not
in the measurable position indicating that it is not in the measurable state.
Check the color here.