Mitutoyo SURFTEST SJ-410 - Timer Setting; Setting the Auto-Sleep Function

No. 99MBB765A
13-40
13.13 Timer Setting
Performs the timer function setup.
13.13.1 Setting the auto-sleep function
The SJ-410 has an auto-sleep function for when the built-in battery is being used.
NOTE
• When the AC adapter is used, auto-sleep does not function irrespective of the setting of
the auto-sleep function. To turn the power off, press the [POWER] key and hold until it is
turned off.
■ Operating procedure (Refer to 13.1, “■ Accessing the Operating Environment Setup screen”.)
Home screen to Main Menu ⇒ ⇒
Operating Environment Setup screen
1
Touch .
Timer Setup screen
2
Set the auto-sleep function to ON or OFF.
Touching
cycles through the available settings, "ON"
and "OFF".
"ON": Sets the auto-sleep function to ON.
"OFF": Sets the auto-sleep function to OFF.
Timer Setup screen
3
Touch /
to set the amount of time to pass until the
auto-sleep function is enabled.
Available range is as follows:
30 to 600 sec (30 sec increments)