Mitutoyo SURFTEST SJ-410 - Setting Evaluating Conditions; Modifying the Roughness Standard

7.3 Setting Evaluating Conditions
7.3.1 Modifying the roughness standard
The SJ-410 is compatible with each of the following roughness standards: JIS1982,
JIS1994, JIS2001, ISO1997, ANSI, and VDA.
TIP
• The currently specified roughness standard is indicated on the upper portion of the
Home screen.
• The file name shown on the upper part of the Home screen when a condition file or
measurement data is loaded disappears when evaluating condition is changed.
■ Operating procedure (Refer to
7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒
Evaluating Condition Menu screen
1 Touch on the Evaluating Condition Menu screen.
Roughness Standard Setup screen
2 Touch a roughness standard to use, and touch .
Evaluating Condition Menu screen
¾ The selected roughness standard is displayed on the
Evaluating Condition Menu screen.
NOTE
• Be careful when modifying the roughness standard, as
other measurement condition items may be
automatically modified as a result.
No. 99MBB765A
7-6