7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
7.5 Setting Measurement Conditions
7.5.1 Modifying the traversing speed
■ Cutoff length (λs) and traversing speed
λs (μm) (μin) Traversing speed (mm/s) (in/s)
2.5 0.05, 0.1, 0.2, 0.5
8 0.05, 0.1, 0.2, 0.5, 1.0
25 0.05, 0.1, 0.2, 0.5, 1.0
■ Operating procedure (Refer to
7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒ ⇒
Measurement Conditions Menu screen
1 Touch on the Measurement Condition Menu
screen.
Traversing Speed Setup screen
2 Touch a traversing speed to use, and touch .
Measurement Conditions Menu screen
¾ The selected traversing speed is displayed on the
Measurement Condition Menu screen.
No. 99MBB765A
7-49
To Next Page
Loading...
