12.4 Executing the Statistical Measurement
■ Operating procedure (Refer to 12.2 "■ Accessing the Statistical Menu screen".)
Home screen to Main Menu ⇒
Statistical Measurement screen
1 Touch on the Statistical Measurement screen.
TIP
• When measurement is performed with the statistical
measurement set to
, the results are cumulated
as the statistical data.
When measurement is performed with the statistical
measurement set to
, the results are not
cumulated as the statistical data.
Statistical Measurement screen
2 Press on the Statistical Measurement screen.
Statistical Calculation Results screen
¾ The measurement results are displayed.
NOTE
• When the statistical measurement is started, you
cannot modify the statistical measurement conditions.
To modify the settings, you need to touch
[Delete
All Files] to delete all the statistical data.
TIP
• To perform measurement more than once, press
more than once.
• Only the latest measurement results are displayed on
the Calculation Results screen. Touch
/ to
display the previous measurement results.
• Up to 300 times of measurement can be handled in the
statistical calculation processing.
• Touch
[Delete １ File] to delete the latest data.
You cannot specify and delete the certain data.
No. 99MBB765A
12-6
To Next Page
Loading...
