10.4.3 Specifying the main folder
After the measurement, press
to save the measurement results in the main folder.
A specific folder can be selected as this main folder in advance.
The main folder can be specified on the Save Folder Select screen.
TIP
• For information about setting the data output, refer to "13.4 Data Output Settings" (page
13-6).
■ Operating procedure (Refer to
10.1 "■ Accessing the Measurement Results Menu screen".)
Home screen to Main Menu ⇒
Measurement Result screen
1 Touch .
Measurement Result Save screen
2 Touch the numeric key displayed to the left of the folder to be
specified as the main folder.
If the folder to be specified as the main folder is not displayed,
touch
/ to display the folder.
Measurement Result Save screen
¾ The numeric button displayed to the left of the folder becomes
blue.
No. 99MBB765A
10-12
To Next Page
Loading...
