Mitutoyo SURFTEST SJ-410 - Setting the Print Magnification

16. DISPLAYING AND ANALYZING THE EVALUATION PROFILES AND GRAPHS
No. 99MBB765A
16-43
16.2.6 Setting the print magnification
The magnification for printing the evaluation profile can be set on the Analyze Waveform
screen.
By displaying the evaluation profile in the magnification specified on the Print
Magnification Setup screen, you can confirm the print image of the evaluation profile.
Touch
on the Analyze Waveform screen, and set the magnification on
the Print Magnification Setup screen.
TIP
• For more information about setting the print magnification, refer to "13.5.2 Setting the
print magnification" (page 13-15).
Displaying the Magnification Setup screen
Touch
[OK] after the magnification has been set to display the waveform in the
magnification specified on the Print Magnification Setup screen.
Touch
[Switch Display] to display the measured profile in the magnification
specified on the Print Magnification Setup screen.