Mitutoyo SURFTEST SJ-410 - Loading the Save10-Saved Data from the SD Card

10. MEASUREMENT RESULTS
10.7 Loading the Save10-saved Data from the SD Card
The Save10-saved data on the SD card can be loaded.
When the Save10-saved data are loaded, the existing SJ-410 internal memory is
overwritten with the loaded Save10-saved data, and the calculation results are displayed.
The following operations can be performed for the loaded results just as for the results
obtained through the measurement: recalculating the measurement results by modifying
the measurement conditions, printing data on the printer, resaving back to the SD card.
IMPORTANT
• By loading the measurement results, the measurement conditions of the SJ-410 are
modified to that when the measurement results are saved.
TIP
• For information about the Save10 function, refer to "13.12.7 Setting the Save10
function" (page 13-36).
■ Operating procedure (Refer to
10.1 "■ Accessing the Measurement Results Menu screen".)
Home screen to Main Menu ⇒
Measurement Result screen
1 Touch .
Save10 Load screen
2 Touch the measurement results to be loaded.
Home screen
¾ The measurement results will be loaded, and then the Home
screen will be restored.
No. 99MBB765A
10-17