Mitutoyo SURFTEST SJ-410 - Setting the Print Magnification

13. OPERATING ENVIRONMENT SETUP
No. 99MBB765A
13-15
13.5.2 Setting the print magnification
The SJ-410 can change the vertical and horizontal magnification of a printed evaluation
profile.
■ Types of vertical and horizontal magnification
The following tables show the possible horizontal and vertical print magnifications that can
be set.
Print Magnification
Vertical
Magnification
(factor)
10, 20, 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K, AUTO
Horizontal
Magnification
(factor)
1, 2, 5, 10, 20, 50, 100, 200, 500, 1K, AUTO
TIP
• When “AUTO” is set, the optimal printing magnification is automatically chosen. During
normal operation, it is recommended to use to the “AUTO” setting.
• The vertical and horizontal magnification has been factory-set to “AUTO” (automatic
optimal magnification).
■ Print example of vertical and horizontal magnification
Vertical (AUTO) Horizontal (AUTO) Vertical (2K) Horizontal (1K)
■ Switching the display
Standard display and automatic shift display are available.
With automatic shift display, the measured profile is displayed in the print magnification.