Desired Tilt Setup screen
4 Touch a place to set the ruler 1.
To adjust the ruler position, touch
/ .
Desired Tilt Setup screen
5 Touch [Switch Ruler].
¾ The ruler 2 is selected and
(red) is displayed above.
TIP
• Touching [Ruler Switch] cycles through rulers.
Desired Tilt Setup screen
6 Touch a place to set the ruler 2.
To adjust the ruler position, touch
/ .
Desired Tilt Setup screen
7 Touch [Range set].
¾ The part between rulers 1 and 2 of the evaluation profile turns
orange.
NOTE
• The specified range of the first half (defined by P1 and
P2) and that of the latter half (defined by P3 and P4)
must meet the following relationship:
P1 <P2 ≦ P3 < P4
• When the two ends are set, [Fast] and [Last] cannot be selected.
Desired Tilt Setup screen
8 Select [Last tilt].
No. 99MBB765A
7-44
To Next Page
Loading...
