7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
■ Operating procedure (Desired tilt (with evaluation profile)
(Refer to
7.2 "■ Accessing the Evaluating Condition Menu screen")
Home screen to Main Menu ⇒ ⇒
Evaluating Condition Menu screen
1 Touch .
Evaluating Condition Menu screen
2 Touch , then touch .
Desired Tilt Setup screen
3 Select [Fast tilt].
Desired Tilt Setup screen
¾ The rulers are displayed on the Desired Tilt Setup screen.
The blue one is Ruler 1, the red one is Ruler 2.
Ruler 1 is selected the first time you set up.
(blue) is
displayed on the selected ruler.
No. 99MBB765A
7-43
To Next Page
Loading...
