■ Attaching the X-axis adjustment unit
NOTE
• Make sure to use the supplied screws.
• When attaching the simple column stand, exercise care so as not to drop the drive unit
or unit to prevent damage.
1 Remove the mount board from the simple column stand.
Simple column stand
Mounting screws (M4 x 8)
Mount board
2 Attach the X-axis adjustment unit to the simple column stand using the 3 mounting
screws.
X-axis adjustment unit
Simple column stand
3 Attach the drive/detector unit to the X-axis adjustment unit using the 2 drive/detector
unit securing screws.
X-axis adjustment unit
Drive/detector unit securing screw
(M4 x 8)
Drive/detector unit
Mounting screws (M4 x 8)
No. 99MBB765A
19-8
To Next Page
Loading...
