Mitutoyo SURFTEST SJ-410 - Page 138

No. 99MBB765A
5-10
■ Operating procedure (Refer to 5.1 "■ Accessing the Drive Unit Operation screen".)
Home screen ⇒
Drive Unit Operation screen
1
Touch ［Zero-point Shift].
Zero-point Shift Setting screen
2
Enter the shift position of the zero point, and touch .
The entered value is displayed at the right side.
The coordinate displayed at the left side indicates the detector
value before zero-point shift.
TIP • Touching sets the value to 0.
• For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Drive Unit Operation screen
 The stylus position is set to the entered value.