No. 99MBB765A
Stylus Alarm screen
Touch to accept the entered values.
TIP
• To cancel the settings, touch , instead of .
The set values will be enabled.
Home screen
A message will be displayed if cumulative distance exceeds
the limit for the first time after measurement has been
completed.
TIP
• Touching
on the message screen clears the
message.
Home screen
After the message disappears,
[alarm indicator of stylus
mark] is displayed to indicate that cumulative distance has
exceeded the threshold.
TIP
•
To set the cumulative distance to 0, touch
on the Stylus Alarm screen.
NOTE
• This function is disabled when the threshold is set to 0.
To Next Page
Loading...
