7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
■ Operating procedure (Refer to 7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒
Evaluating Condition Menu screen
1 Touch on the Evaluating Condition Menu screen.
Evaluation Profile Setup screen
2 Touch in the Evaluation Profile Setup screen,
then touch
.
Evaluating Condition Menu screen
3 Touch .
L Setup screen
4 Select the measurement sampling length to use, and touch .
TIP
• The unit of length is mm.
No. 99MBB765A
7-9
To Next Page
Loading...
