■ Operating procedure (Refer to 7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒
Evaluating Condition Menu screen
1 Touch on the Evaluating Condition Menu screen.
Evaluation Profile Setup screen
2 Touch or in the
Evaluation Profile Setup screen, then touch
.
Evaluating Condition Menu screen
3 Touch .
Cut-off Value (λc) Setup screen
4 Select the cut-off length (λc) to use, and touch .
TIP
• The unit of cut-off length is mm.
No. 99MBB765A
7-12
To Next Page
Loading...
