Mitutoyo SURFTEST SJ-410 - Page 229

7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
Condition File Save screen
(Internal memory)
3 Touch the number for the conditions file.
Condition File Name Input screen
(Internal memory)
4 Enter the condition file name, and then, touch .
To cancel saving, touch
.
TIP
• For information about character entry, refer to "2.2.4
Entering numeric values/characters" (page 2-5).
NOTE
• A file name can have at most 8 characters. Refer to "
2.2.4 Entering numeric values/characters" (page 2-5).
• The file name or folder name cannot include lowercase
alphabets.
Condition File Save screen
(Internal memory)
¾ The condition file name enters is displayed on Condition File
Save screen.
■ Operating procedure (saving to the SD card)
(Refer to
7.2 “■ Accessing the Evaluation Condition Menu screen”)
Home screen to Main Menu ⇒
Evaluating Condition Menu screen
1 Touch [Condition Save] on the Evaluating Condition Menu
screen.
No. 99MBB765A
7-63